2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT INTAKE AIR TEMPERATURE SENSOR

A108624E15
  1. Using an ohmmeter, measure the resistance between the terminals.

    Standard resistance:
    2.21 to 2.65 kΩ at 20°C(68°F)

    NOTICE:
    When checking the intake air temperature sensor in water, keep the terminals dry. After the check, wipe the sensor dry.

    If the result is not as specified, replace the sensor.

← REMOVAL (from Oct 2014)INSTALLATION (Oct 2014 – Dec 2014) →