INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT CAMSHAFT POSITION SENSOR |
![]() ![]() |
Measure the resistance between the terminals.
- Standard resistance:
Temperature
Specified Condition
Cold
1630 to 2740 Ω
Hot
2065 to 3255 Ω
- HINT:
- In the table above, the terms "cold" and " hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F). If the resistance is not as specified, replace the sensor.


