REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. SEPARATE VANE PUMP OIL RESERVOIR ASSEMBLY |
Remove the 2 bolts and disconnect the vane pump oil reservoir.

| 3. REMOVE CRANKSHAFT POSITION SENSOR |
![]() ![]() |
Disconnect the crankshaft position sensor connector.
Separate the connector from the No. 1 vacuum pipe .
Separate the 3 wire harness clamps.

Remove the bolt and the crankshaft position sensor.

