REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE ENGINE UNDER COVER NO.1 (w/ Engine Under Cover Assembly) |
| 2. DRAIN COOLANT |
| 3. REMOVE RADIATOR GRILLE |
Put protective tape around the radiator grille.

Text in Illustration *1
Protective Tape
Remove the 4 clips and 2 screws.

Detach the 8 claws and remove the radiator grille.
| 4. REMOVE NO. 2 AIR INLET DUCT |
Detach the 3 clips and remove the No. 2 air inlet duct.

| 5. REMOVE NO. 1 AIR INLET DUCT |
Detach the 2 clips.

Remove the 2 bolts and No. 1 air inlet duct.
| 6. DRAIN WINDSHIELD WASHER FLUID |
| 7. REMOVE WINDSHIELD WASHER JAR ASSEMBLY |
Disconnect the washer hose.

Detach the clamp.
Remove the 2 bolts and windshield washer jar.
Disconnect the washer hose.

Detach the clamp.
Disconnect the 2 connectors.
| 8. REMOVE RADIATOR RESERVE TANK ASSEMBLY |
Disconnect the water by-pass hose.

Remove the bolt and radiator reserve tank.
Disconnect the No. 2 water by-pass hose.

| 9. REMOVE HOOD LOCK ASSEMBLY |
Remove the 3 bolts and hood lock.

Disconnect the hood lock control cable.

| 10. REMOVE UPPER RADIATOR SUPPORT |
Remove the hood lock control cable from the 2 clamps.

Remove the 6 bolts, 2 screws and upper radiator support.

| 11. REMOVE INTERCOOLER ASSEMBLY |
Loosen the hose clamp and disconnect the No. 2 air hose.

Loosen the hose clamp and disconnect the No. 3 air hose.
Remove the 3 bolts and intercooler.
