REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 2.
REMOVE RADIATOR GRILLE
|
 |
- Put protective tape around the radiator grille.
Text in Illustration
*1
|
Protective Tape
|
- Remove the 4 clips and 2 screws.
Detach the 8 claws and remove the radiator grille.
| 3.
REMOVE NO. 2 AIR INLET DUCT |
 |
- Detach the 3 clips and remove the No. 2 air inlet duct.
| 4.
REMOVE NO. 1 AIR INLET DUCT |
 |
- Detach the 2 clips.
Remove the 2 bolts and No. 1 air inlet duct.
| 5.
DRAIN WINDSHIELD WASHER FLUID |
|
| 6.
REMOVE WINDSHIELD WASHER JAR ASSEMBLY |
 |
- Disconnect the washer hose.
Detach the clamp.
Remove the 2 bolts and windshield washer jar.
- Disconnect the washer hose.
Detach the clamp.
Disconnect the 2 connectors.
| 7.
REMOVE RADIATOR RESERVE TANK ASSEMBLY |
 |
- Disconnect the water by-pass hose.
Remove the bolt and radiator reserve tank.
- Disconnect the No. 2 water by-pass hose.
| 8.
REMOVE HOOD LOCK ASSEMBLY |
 |
- Remove the 3 bolts and hood lock.
- Disconnect the hood lock control cable.
| 9.
REMOVE UPPER RADIATOR SUPPORT |
 |
- Remove the hood lock control cable from the 2 clamps.
- Remove the 6 bolts, 2 screws and upper radiator support.
| 10.
REMOVE INTERCOOLER ASSEMBLY |
 |
- Loosen the hose clamp and disconnect the No. 2 air hose.
Loosen the hose clamp and disconnect the No. 3 air hose.
Remove the 3 bolts and intercooler.