2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jan 2017


1. DRAIN COOLANT

2. REMOVE RADIATOR GRILLE

  1. B366619E01
    Put protective tape around the radiator grille.
    Text in Illustration 
    *1
    Protective Tape

  1. B361905
    Remove the 4 clips and 2 screws.

  1. Detach the 8 claws and remove the radiator grille.


3. REMOVE NO. 2 AIR INLET DUCT

  1. A272453
    Detach the 3 clips and remove the No. 2 air inlet duct.


4. REMOVE NO. 1 AIR INLET DUCT

  1. A401163
    Detach the 2 clips.

  1. Remove the 2 bolts and No. 1 air inlet duct.


5. DRAIN WINDSHIELD WASHER FLUID

6. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

  1. A396703
    Remove the 2 bolts and windshield washer motor and pump assembly.

  1. A396704
    Detach the hose clamp.

  1. Disconnect the 2 connectors and 2 washer hoses.


7. DISCONNECT UREA TANK FILLER PIPE ASSEMBLY

  1. A397673
    Disconnect the 2 bolts and urea tank filler pipe assembly from the upper radiator support sub-assembly.


8. REMOVE RADIATOR RESERVE TANK ASSEMBLY

  1. A144601
    Disconnect the water by-pass hose.

  1. Remove the bolt and radiator reserve tank.

  1. A144610
    Disconnect the No. 2 water by-pass hose.


9. REMOVE HOOD LOCK ASSEMBLY

  1. A144604
    Remove the 3 bolts and hood lock.

  1. A144605
    Disconnect the hood lock control cable.


10. REMOVE UPPER RADIATOR SUPPORT

  1. A144606
    Remove the hood lock control cable from the 2 clamps.

  1. A144607
    Remove the 6 bolts, 2 screws and upper radiator support.


11. REMOVE INTERCOOLER ASSEMBLY

  1. A401164
    Loosen the hose clamp and disconnect the No. 2 air hose.

  1. Loosen the hose clamp and disconnect the No. 3 air hose.

  1. Remove the 3 bolts and intercooler.

← COMPONENTS (from Jan 2017)INSTALLATION (from Jan 2017) →