2014-2019 Hiace · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT COOLING FAN RELAY

E109076E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester connection
      Specified Condition
      3 - 5
      10 kΩ or higher
      3 - 5
      Below 1 Ω
      (Apply battery voltage to terminals 1 and 2)

      If the resistance is not as specified, replace the cooling fan relay.


INSPECT NO. 2 COOLING FAN RELAY (w/ Air Conditioning System)

E109076E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester connection
      Specified Condition
      3 - 5
      10 kΩ or higher
      3 - 5
      Below 1 Ω
      (Apply battery voltage to terminals 1 and 2)

      If the resistance is not as specified, replace the No. 2 cooling fan relay.

← INSTALLATION (from Apr 2016)COMPONENTS (from Oct 2014) →