REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE STEERING COLUMN ASSEMBLY |
| 2. REMOVE STEERING COLUMN UPPER W/SWITCH BRACKET ASSEMBLY |
Using a center punch, mark the center of the 2 steering lock set bolts.
Using a drill, drill a hole in the 2 bolts.
Using a screw extractor, remove the 2 bolts and the steering column upper with switch bracket assembly.

| 3. REMOVE IGNITION SWITCH |
![]() ![]() |
Remove the 2 screws and the ignition switch from the steering column upper bracket.

