DISASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1.
REMOVE VACUUM PUMP UNION |
 |
- Fix the vacuum pump in a vise between aluminum plates.
- NOTICE:
- Do not overtighten the vise.
Remove the union bolt, vacuum pump union and 2 gaskets.
| 2.
REMOVE CHECK VALVE SUB-ASSEMBLY |
 |
- Remove the check valve and gasket.
| 3.
REMOVE VACUUM PUMP END COVER |
 |
- Remove the 3 bolts.
- Place the vacuum pump in a vise between aluminum plates.
Using a 5 mm pin punch and hammer, tap out the 2 straight pins.
Remove the vacuum pump end cover and 2 O-rings.
| 4.
REMOVE VACUUM PUMP BLADE |
 |
- Remove the vacuum pump rotor together with the 5 vacuum pump blades.
- NOTICE:
- Be careful not to drop the vacuum pump blades.
Remove the 5 vacuum pump blades from the vacuum pump rotor.
| 5.
REMOVE VACUUM PUMP GEAR |
 |
- Fix the vacuum pump gear in a vise between aluminum plates.
- NOTICE:
- Do not overtighten the vise.
Remove the gear lock nut.
Remove the vacuum pump gear and woodruff key.
| 6.
REMOVE VACUUM PUMP SHAFT |
 |
- Using a plastic hammer, tap out the vacuum pump shaft.
| 7.
REMOVE VACUUM PUMP BEARING |
 |
- Using snap ring pliers, remove the snap ring.
- Using a 17 mm socket wrench and press, press out the vacuum pump bearing.