2014-2019 Hiace · Service Manual HEATER & AIR CONDITIONING SYSTEM

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT FRONT BLOWER RESISTOR (for LHD)

  1. I103752E02
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 4
    Always
    3.12 to 3.60 Ω
    1 - 2
    Always
    1.45 to 1.67 Ω
    1 - 3
    Always
    0.52 to 0.60 Ω

    If the result is not as specified, replace the front blower resistor.


INSPECT FRONT BLOWER RESISTOR (for RHD)

  1. I103752E02
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 4
    Always
    3.12 to 3.60 Ω
    3 - 4
    Always
    1.45 to 1.67 Ω
    2 - 4
    Always
    0.52 to 0.60 Ω

    If the result is not as specified, replace the front blower resistor.

← INSPECTION (from Oct 2014)INSPECTION (from Oct 2014) →