2014-2019 Hiace · Service Manual CRUISE CONTROL SYSTEM

TERMINALS OF ECM

System information · Vehicles built from Oct 2014


CHECK ECM (for 1KD-FTV)
C128047E38
  1. Disconnect the B72 and D98 ECM connectors.

  2. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    B72-2 (BATT) - Body ground
    W - Body ground
    Power source circuit
    Always
    11 to 14 V
    B72-25 (IGSW) - Body ground
    B - Body ground
    IG power source circuit
    Ignition switch ON
    11 to 14 V
    Ignition switch off
    Below 1 V
    B72-34 (ST1-) - Body ground
    R - Body ground
    Stop light switch signal circuit
    Ignition switch ON, brake pedal released
    11 to 14 V
    Ignition switch ON, brake pedal depressed
    Below 1 V
    B72-35 (STP) - Body ground
    Y - Body ground
    Stop light switch signal circuit
    Brake pedal depressed
    11 to 14 V
    Brake pedal released
    Below 1 V
    B72-23 (CCS) - Body ground
    SB - Body ground
    Cruise control switch circuit
    Cruise control main switch on
    Below 2.5 Ω
    Cruise control main switch off
    1 MΩ or higher
    +RES switch held on
    235 to 245 Ω
    -SET switch held on
    620 to 640 Ω
    CANCEL switch held on
    1510 to 1570 Ω
    D98-73 (CLSW) - Body ground*
    R - Body ground
    Clutch switch signal circuit
    Ignition switch ON, clutch pedal depressed
    11 to 14 V
    Ignition switch ON, clutch pedal released
    Below 1 V
    D98-109 (E1) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    *: for Manual Transmission
    If the result is not as specified, there may be a malfunction on the wire harness side.


CHECK ECM (for 2TR-FE)
C128047E39
  1. Disconnect the B71 and D97 ECM connectors.

  2. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    B71-20 (BATT) - Body ground
    W - Body ground
    Power source circuit
    Always
    11 to 14 V
    B71-27 (IGSW) - Body ground
    B - Body ground
    IG power source circuit
    Ignition switch ON
    11 to 14 V
    Ignition switch off
    Below 1 V
    B71-35 (ST1-) - Body ground
    R - Body ground
    Stop light switch signal circuit
    Ignition switch ON, brake pedal released
    11 to 14 V
    Ignition switch ON, brake pedal depressed
    Below 1 V
    B71-36 (STP) - Body ground
    Y - Body ground
    Stop light switch signal circuit
    Brake pedal depressed
    11 to 14 V
    Brake pedal released
    Below 1 V
    B71-40 (CCS) - Body ground
    SB - Body ground
    Cruise control switch circuit
    Cruise control main switch on
    Below 2.5 Ω
    Cruise control main switch off
    1 MΩ or higher
    +RES switch held on
    235 to 245 Ω
    -SET switch held on
    620 to 640 Ω
    CANCEL switch held on
    1510 to 1570 Ω
    B71-47 (D) - Body ground*
    R - Body ground
    Clutch switch signal circuit
    Ignition switch ON, clutch pedal depressed
    11 to 14 V
    Ignition switch ON, clutch pedal released
    Below 1 V
    B71-32 (EC) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    D97-105 (E1) - Body ground
    W-B - Body ground
    *: for Manual Transmission
    If the result is not as specified, there may be a malfunction on the wire harness side.

← PROBLEM SYMPTOMS TABLE (from Dec 2017)DIAGNOSIS SYSTEM (from Oct 2014) →