2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Jan 2017


1. INSTALL DIESEL TURBO PRESSURE SENSOR

A398610E01
  1. Connect the vacuum hose to the diesel turbo pressure sensor.

    Text in Illustration 
    *1
    Diesel Turbo Pressure Sensor
    *a
    Vacuum Hose
    *b
    Protrusion
    *c
    Paint Mark

    NOTICE:
    Connect the vacuum hose so that the paint mark on the vacuum hose is aligned with the protrusions of the diesel turbo pressure sensor as shown in the illustration.

  1. Install the diesel turbo pressure sensor with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

    NOTICE:
    Make sure the protrusion is inserted into the hole of the diesel turbo pressure sensor.

  1. Connect the diesel turbo pressure sensor connector.

← REMOVAL (from Jan 2017)COMPONENTS (from Jan 2017) →