REMOVAL
Removal / installation · Vehicles built from Jan 2017
| 1. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY |
- NOTICE:
- This accelerator pedal does not require lubrication.
- Do not apply oil or other lubrication to the accelerator pedal rod assembly.
- If applied, the accelerator pedal rod assembly must be replaced.
Disconnect the accelerator pedal rod connector.

Remove the 2 nuts and accelerator pedal rod assembly.
- NOTICE:
- Avoid physical shocks to the accelerator pedal sensor assembly.
- Do not disassemble the accelerator pedal sensor assembly.
- Avoid physical shocks to the accelerator pedal sensor assembly.
