2014-2019 Hiace · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from Oct 2014

STEERING PAD SWITCH LH 
Connector Condition
Tester Connection
Switch Condition
Specified Condition
Component without harness connected
11 (AU1) - 8 (EAU)
No switch pushed
95 to 105 kΩ
VOL+ switch pushed
950 to 1050 Ω
VOL- switch pushed
2955 to 3265 Ω
SEEK+ switch pushed
Below 2.5 Ω
SEEK- switch pushed
313 to 345 Ω
MODE switch pushed
95 to 105 kΩ
A10 (AU2) - A8 (EAU)
No switch pushed
95 to 105 kΩ
VOL+ switch pushed
VOL- switch pushed
SEEK+ switch pushed
SEEK- switch pushed
MODE switch pushed
Below 2.5 Ω
1(HO) - Horn Wire
Always
Below 2.5 Ω
← TORQUE SPECIFICATIONS (from Oct 2014)TORQUE SPECIFICATIONS (from Oct 2014) →