2014-2019 Hiace · Service Manual RESTRAINTS

CUSTOMIZE PARAMETERS

Removal / installation · Vehicles built from Oct 2014


1. CUSTOMIZE SEAT BELT WARNING SYSTEM

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Customizing with the GTS

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Utility / Customize Setting / Warning.

    5. Select the setting by referring to the table below.

      Warning 
      Display
      Default
      Content
      Setting
      Relevant ECU
      Driver Side Seatbelt Warning Buzzer*1
      ON
      Function to turn on/off the seat belt warning buzzer
      ON or OFF
      Combination meter assembly
      Front Passenger Side Seatbelt Warning Buzzer*2
      ON
      Function to turn on/off the seat belt warning buzzer
      ON or OFF
      Combination meter assembly
      1. *1: w/ Driver Side Seat Belt Warning Buzzer
      2. *2: w/ Front Passenger Seat Belt Warning System

      HINT:
      This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more

← PARTS LOCATION (from Oct 2014)PROBLEM SYMPTOMS TABLE (Oct 2014 – Dec 2014) →