2014-2019 Hiace · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT BACK WINDOW GLASS HAMMER ASSEMBLY

B320327E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Switch on
    (Lever pushed)
    Below 1 Ω
    1 - 2
    Switch off
    (Lever not pushed)
    10 kΩ or higher

    If the result is not as specified, replace the back window glass hammer assembly.
    Text in Illustration 
    *1
    Switch
    *2
    Lever
    *a
    Component without harness connected
    (Back Window Glass Hammer Assembly)

← REMOVAL (from Jan 2017)INSTALLATION (Oct 2014 – Dec 2016) →