2014-2019 Hiace · Service Manual TRANSMISSION

ADJUSTMENT

Removal / installation · Vehicles built Oct 2014 – Dec 2014


1. ADJUST SHIFT LEVER POSITION

  1. C295043
    Remove a clip, nut, and disconnect between the control shaft lever to transmission control cable assembly from the control shaft lever and transmission control cable bracket No. 1.

  1. C101788E06
    Turn the control shaft lever until stop to a clockwise direction, return the control shaft lever 2 notches to N position.

  1. C101803
    Set the shift lever to N position while holding the shift lever lightly toward the R position side and install it.

    Torque:
    15 N*m{ 150 kgf*cm , 11 ft.*lbf }

  1. Inspect the operation condition and work.

← INSPECTION (Oct 2014 – Dec 2014)REASSEMBLY (Oct 2014 – Dec 2014) →