2014-2019 Hiace · Service Manual BODY ELECTRICAL

FREEZE FRAME DATA

Troubleshooting · Vehicles built from Oct 2014


FREEZE FRAME DATA
  1. Whenever a meter DTC is detected, the combination meter assembly stores the current vehicle state as Freeze Frame Data.


CHECK FREEZE FRAME DATA
  1. Connect the GTS to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the GTS on.

  4. Enter the following menus: Body Electrical / Combination Meter / Trouble Codes.

  5. According to the GTS display, select a DTC that stored Freeze Frame Data.

  6. Read the freeze frame data recorded when the DTC was stored.

    Combination Meter 
    Tester Display
    Condition
    Displayed Item
    B1507
    Open in Turn Signal Circuit
    1. Trip
    2. Elapsed time after turning the ignition switch to ON
    B1508
    Short in Turn Signal / Hazard Flasher Circuit
    U0100
    Lost Communication with ECM / PCM "A"
    U0182
    Lost Communication with Lighting Control Module Front

← DTC CHECK / CLEAR (from Oct 2014)DATA LIST / ACTIVE TEST (Oct 2014 – Dec 2014) →