2014-2019 Hiace · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jan 2015


INSPECT BATTERY CURRENT SENSOR ASSEMBLY

  1. A192813E03
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    2 (VC5) - 4 (E2)
    Always
    0.1 to 10 kΩ
    2 (VC5) - 3 (IB)
    0.5 kΩ or less
    3 (IB) - 4 (E2)
    0.05 to 10 kΩ

    Text in Illustration 
    *a
    Component without harness connected
    (Battery Current Sensor Assembly)
    If the result is not as specified, replace the battery current sensor assembly.

  1. A348183E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (THB) - 4 (E2)
    20 to 30°C
    1.5 to 2.5 kΩ

    Text in Illustration 
    *a
    Component without harness connected
    (Battery Current Sensor Assembly)
    *b
    Resistance
    *c
    Temperature
    If the result is not as specified, replace the battery current sensor assembly.

← INSTALLATION (from Apr 2016)ON-VEHICLE INSPECTION (from Oct 2014) →