2014-2019 Hiace · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jan 2015


1. INSTALL FRONT HOOD PROTECTOR

HINT:
  1. When installing the front hood protector, heat the vehicle body and front hood protector using a heat light.
  2. Use the same procedure for both front hood protectors.

Standard:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Front Hood Protector
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body or front hood protector excessively.

  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new front hood protector.

    1. Using a heat light, heat the vehicle body and front hood protector.

    2. Remove the peeling paper from the face of the front hood protector.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Install the front hood protector in the position shown in the illustration with a force of 29 N (3 kgf) or more.

      HINT:
      Press the front hood protector firmly to install it.


      B393587E01

      Standard:
      Area
      Specified Condition
      Area
      Specified Condition
      A
      98 mm (3.86 in.)
      -
      -

← REMOVAL (from Jan 2015)COMPONENTS (from Oct 2014) →