2014-2019 Hiace · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Jan 2015

NOTICE:
Make sure to release vacuum from the brake booster assembly before removing the vacuum warning switch assembly from the brake booster assembly.


1. REMOVE VACUUM WARNING SWITCH ASSEMBLY

  1. C318066
    Disconnect the connector from the vacuum warning switch assembly.

  1. C318067
    Remove the vacuum warning switch assembly from the brake booster assembly.


2. REMOVE CHECK VALVE GROMMET
  1. Remove the check valve grommet from the brake booster assembly.

← ON-VEHICLE INSPECTION (from Jan 2015)INSTALLATION (from Jan 2015) →