Home › Vehicle Exterior › BODY PANEL › FRONT FENDER APRON
BM35X0E _01 Vehicle Exterior _080418 BODY PANEL _0389993 FRONT FENDER APRON F

BODY PANEL  FRONT FENDER APRON  ASSEMBLY REPLACEMENT  


K151878

With the radiator support assembly and cowl top side upper panel assembly and cowl top side panel assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points

K150995

K150996


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108824

Plug Weld
K108834

Body Sealer

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


c.

Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.


d.

Before installing a new part, apply body sealer.

HINT:

Apply body sealer in an even, continuous bead.


K151340

K150997C01
2.5,0.583 2.667,0.583 2.667,0.583 3.083,1.083 false 2.354,0.5 2.667,0.698 0.313,0.198 10 false *1
*1 FRONT FENDER APRON SUB-ASSEMBLY - -


K150998


e.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)


f.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.