Home › Vehicle Exterior › BODY PANEL › FRONT SIDE MEMBER
BM35X0E _01 Vehicle Exterior _080418 BODY PANEL _0389995 FRONT SIDE MEMBER F

BODY PANEL  FRONT SIDE MEMBER  ASSEMBLY REPLACEMENT  


K151880

With the front fender apron assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

a.

Remove the A.

HINT:

A is reused.


K151070N01
1.167,3.167 1.333,3.167 1.333,3.167 1.854,2.385 false 1,3.083 1.156,3.281 0.156,0.198 10 false A


b.

Remove the front side member plate No.1 and front side member sub-assembly.

K151071C01
4.125,2.292 4.333,1.833 4.333,1.833 4.5,1.833 false 3.417,3.083 3.583,3.083 3.583,3.083 3.74,2.583 false 4.573,1.75 4.885,1.906 0.313,0.156 10 false *1 3.24,3 3.552,3.156 0.313,0.156 10 false *2 2.021,1.76 2.333,1.917 0.313,0.156 10 false *a
*1 FRONT SIDE MEMBER PLATE NO.1 *2 FRONT SIDE MEMBER SUB-ASSEMBLY
*a 70 mm (2.76 in.) - -




INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108831

Butt Weld

a.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


b.

Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.


c.

Weld the front side member plate No.1 and front side member sub-assembly to the vehicle side.

K151072C01
4.021,5.438 4.5,5.083 4.5,5.083 4.667,5.083 false 3.583,6.5 3.75,6.5 3.75,6.5 4,6.052 false 4.74,5.01 5.052,5.167 0.313,0.156 10 false *1 3.396,6.427 3.708,6.583 0.313,0.156 10 false *2
*1 FRONT SIDE MEMBER PLATE NO.1 *2 FRONT SIDE MEMBER SUB-ASSEMBLY



d.

Weld the A to the vehicle side.

K151073N01
1.167,3.083 1.333,3.083 1.333,3.083 1.885,2.427 false 1.021,3.01 1.177,3.208 0.156,0.198 10 false A


e.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)


f.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.