Home › Vehicle Exterior › BODY PANEL › REAR FLOOR REAR INNER CROSSMEMBER (for Van)
BM35X0E _01 Vehicle Exterior _080418 BODY PANEL _0390010 REAR FLOOR REAR INNER CROSSMEMBER(for Van) F

BODY PANEL  REAR FLOOR REAR INNER CROSSMEMBER(for Van)  CUT AND JOIN REPLACEMENT SECTIONS (LARGE AREAS)  


K151922

With the rear floor rear cross outer panel cut and join replacement sections (large areas) removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points

K151033C01
0,0 0,0 false


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108825

Plug Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K151034C01
3.469,2.177 3.25,1.583 3.25,1.583 3.417,1.583 false 3.469,1.51 3.781,1.667 0.313,0.156 10 false *1
*1 REAR FLOOR REAR CROSS MEMBER SUB-ASSEMBLY INNER - -



c.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.