Home › Vehicle Exterior › BODY PANEL › REAR FLOOR REAR INNER CROSSMEMBER (for Commuter)
BM35X0E _01 Vehicle Exterior _080418 BODY PANEL _0391629 REAR FLOOR REAR INNER CROSSMEMBER(for Commuter) F

BODY PANEL  REAR FLOOR REAR INNER CROSSMEMBER(for Commuter)  CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)  


K151923

With the rear floor rear cross outer panel cut and join replacement sections (small areas) removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points

K151031


INSTALLATION


Symbol Meaning
K108823

Plug Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K151032C01
3.542,2.083 3.333,1.583 3.333,1.583 3.5,1.583 false 3.573,1.51 3.885,1.667 0.313,0.156 10 false *1
*1 REAR FLOOR REAR CROSS MEMBER SUB-ASSEMBLY INNER - -



c.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.