With the rear floor pan cut and join replacement sections removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Remove Weld Points |
| *A | for Space Up Seat | - | - |
| *A | except Space Up Seat | - | - |
| *A | LH Side | *B | RH Side |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
|
Plug Weld |
| *A | for Space Up Seat | - | - |
| *1 | REAR FLOOR CROSS MEMBER SUB-ASSEMBLY NO.6 | - | - |
| *A | except Space Up Seat | - | - |
| *1 | REAR FLOOR CROSS MEMBER SUB-ASSEMBLY NO.6 | - | - |
| *A | LH Side | *B | RH Side |
After welding, apply undercoating to the corresponding parts. (See the painting/coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.