Use point L,l when performing centering measurements for the body dimensions.
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
for 4Door
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Slide Door Hinge Installation Nut | M8 (0.31) |
| B, b | Center Body Pillar Assembly Mark | - |
| C, c | Center Body Pillar Assembly Mark | - |
| D, d | Rocker Panel Assembly Mark | - |
| E, e | Rocker Panel Assembly Mark | - |
| F, f | Roof Side Rail Assembly Mark | - |
| G, g | Roof Side Rail Assembly Mark | - |
| H, h | Quarter Panel Assembly Mark | - |
| J, j | Quarter Panel Assembly Mark | - |
| K, k | Slide Door Hinge Installation Nut | M8 (0.31) |
| L, l | Rear Floor Panel Standard Hole | φ25 (0.98) |
| *a | mm
(in.) |
- | - |
| *L | Length distance | - | - |
| *a | mm
(in.) |
- | - |
for except 4Door
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Slide Door Hinge Installation Nut | M8 (0.31) |
| B, b | Center Body Pillar Assembly Mark | - |
| C, c | Center Body Pillar Assembly Mark | - |
| D, d | Rocker Panel Assembly Mark | - |
| E, e | Rocker Panel Assembly Mark | - |
| F, f | Roof Side Rail Assembly Mark | - |
| G, g | Roof Side Rail Assembly Mark | - |
| H, h | Quarter Panel Assembly Mark | - |
| J, j | Quarter Panel Assembly Mark | - |
| K, k | Slide Door Hinge Installation Nut | M8 (0.31) |
| L, l | Rear Floor Panel Standard Hole | φ25 (0.98) |
| *a | mm
(in.) |
- | - |
| *W | Width distance | *L | Length distance |
| *X | Diagonal distance | - | - |
| *a | mm
(in.) |
- | - |
| *X | Diagonal distance | - | - |