With the roof panel No.1 assembly removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Remove Weld Points |
| *A | for Type A | - | - |
| *A | for Type B | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
|
Plug Weld |
|
Body Sealer |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
Before temporarily installing the new parts, apply body sealer and adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115) to the roof panel reinforcement sub-assembly No.3, roof panel reinforcement sub-assembly No.5 and roof panel reinforcement sub-assembly No.6.
Apply enough body sealer to the panels.
| *1 | ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.3 | *2 | ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.5 |
| *3 | ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.6 | - | - |
|
Adhesive | - | - |
Before temporarily installing the new parts, weld the roof panel rear, roof panel reinforcement sub-assembly No.3, roof panel reinforcement sub-assembly No.5 and roof panel reinforcement sub-assembly No.6 with the standard number of welding points.
| *1 | ROOF PANEL REAR | *2 | ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.3 |
| *3 | ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.5 | *4 | ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.6 |
Before temporarily installing the new parts, apply body sealer to the roof panel reinforcement No.4.
Apply enough body sealer to the panels.
| *1 | ROOF PANEL REINFORCEMENT NO.4 | - | - |
Weld the roof panel rear to the vehicle side.
| *A | for Type A | - | - |
| *1 | ROOF PANEL REAR | - | - |
| *A | for Type B | - | - |
| *1 | ROOF PANEL REAR | - | - |
After welding, apply body sealer to the corresponding parts. (See the painting/coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 1031 mm (40.59 in.) | B | 1177 mm (46.34 in.) |
| C | 1383 mm (54.45 in.) | D | 2004 mm (78.90 in.) |
| E | 480 mm (18.90 in.) | F | 861 mm (33.90 in.) |
| G | 1688 mm (66.46 in.) | - | - |