Home › Vehicle Exterior › BODY PANEL › BACK DOOR OPENING TROUGH › from 2019.06
BM35X0E _01 Vehicle Exterior _080418 BODY PANEL _0390006 BACK DOOR OPENING TROUGH F

BODY PANEL  BACK DOOR OPENING TROUGH  CUT AND JOIN REPLACEMENT SECTIONS  


K151914

With the quarter panel cut and join replacement sections removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

a.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K151078C02
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A except Wagon - -
K108837

Adhesive - -


K153063C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A for Wagon - -
K108837

Adhesive - -


K151074C01
2.521,1.385 2.833,1.542 0.313,0.156 10 false *a 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A for Standard Roof - -
*a 255 mm (10.04 in.) - -


K152223C02
2.406,1.75 2.719,1.906 0.313,0.156 10 false *a 0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A for High Roof - -
*a 255 mm (10.04 in.) - -


K151075



INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108825

Plug Weld
K108831

Butt Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


c.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K151078C02
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A except Wagon - -
K108837

Adhesive - -


K153063C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A for Wagon - -
K108837

Adhesive - -


K151076C01
2.75,3.25 2.917,3.25 2.917,3.25 3.469,2.458 false 2.573,3.167 2.885,3.323 0.313,0.156 10 false *1 0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A for Standard Roof - -
*1 BACK DOOR OPENING SIDE FRAME SUB-ASSEMBLY - -


K152224C02
2.552,3.25 2.719,3.25 2.719,3.25 3.271,2.458 false 2.375,3.167 2.688,3.323 0.313,0.156 10 false *1 0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A for High Roof - -
*1 BACK DOOR OPENING SIDE FRAME SUB-ASSEMBLY - -


K151077


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.