Home › Vehicle Exterior › BODY PANEL › ROOF PANEL NO.2 (for Standard Roof) › from 2019.06
BM35X0E _01 Vehicle Exterior _080418 BODY PANEL _0391954 ROOF PANEL NO.2(for Standard Roof) F

BODY PANEL  ROOF PANEL NO.2(for Standard Roof)  ASSEMBLY REPLACEMENT  


K151935

With the roof panel No.1 assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points

K151426C01
0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A for Type A - -


K152058C01
0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A for Type B - -


K151427


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108825

Plug Weld
K108834

Body Sealer

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


c.

Before temporarily installing the new parts, apply body sealer and adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115) to the roof panel reinforcement sub-assembly No.3, roof panel reinforcement sub-assembly No.5 and roof panel reinforcement sub-assembly No.6.

HINT:

Apply enough body sealer to the panels.


K151428C02
1.698,0.865 1.833,0.333 1.833,0.333 2,0.333 false 3.677,0.906 3.917,0.333 3.917,0.333 4.083,0.333 false 4.51,0.885 4.75,0.333 4.75,0.333 4.917,0.333 false 2.083,0.26 2.396,0.417 0.313,0.156 10 false *1 4.167,0.26 4.479,0.417 0.313,0.156 10 false *2 5,0.25 5.313,0.406 0.313,0.156 10 false *3 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A except Wagon - -
*1 ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.3 *2 ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.5
*3 ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.6 - -
K108837

Adhesive - -


K153132C01
1.698,0.865 1.833,0.333 1.833,0.333 2,0.333 false 3.677,0.906 3.917,0.333 3.917,0.333 4.083,0.333 false 4.51,0.885 4.75,0.333 4.75,0.333 4.917,0.333 false 2.083,0.26 2.396,0.417 0.313,0.156 10 false *1 4.167,0.26 4.479,0.417 0.313,0.156 10 false *2 5,0.25 5.313,0.406 0.313,0.156 10 false *3 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A for Wagon - -
*1 ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.3 *2 ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.5
*3 ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.6 - -
K108837

Adhesive - -



d.

Before temporarily installing the new parts, weld the roof panel rear, roof panel reinforcement sub-assembly No.3, roof panel reinforcement sub-assembly No.5 and roof panel reinforcement sub-assembly No.6 with the standard number of welding points.

K151430C01
1,0.417 1.167,0.417 1.167,0.417 1.552,0.885 false 2.917,0.333 3.083,0.333 3.083,0.333 3.427,0.896 false 4.521,0.896 4.917,0.333 4.917,0.333 5.083,0.333 false 6.083,2.75 5.917,2.75 5.917,2.75 5.646,2.333 false 6.156,2.677 6.469,2.833 0.313,0.156 10 false *1 0.833,0.344 1.146,0.5 0.313,0.156 10 false *2 2.688,0.25 3,0.406 0.313,0.156 10 false *3 5.156,0.26 5.469,0.417 0.313,0.156 10 false *4
*1 ROOF PANEL REAR *2 ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.3
*3 ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.5 *4 ROOF PANEL REINFORCEMENT SUB-ASSEMBLY NO.6



e.

Before temporarily installing the new parts, apply body sealer to the roof panel reinforcement No.4.

HINT:

Apply enough body sealer to the panels.


K151431C01
2.594,1.479 2.917,0.833 2.917,0.833 3.083,0.833 false 3.188,0.76 3.5,0.917 0.313,0.156 10 false *1
*1 ROOF PANEL REINFORCEMENT NO.4 - -



f.

Weld the roof panel rear to the vehicle side.

K151432C01
0.917,2.333 1.083,2.333 1.083,2.333 1.521,2.823 false 0.688,2.26 1,2.417 0.313,0.156 10 false *1 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A for Type A - -
*1 ROOF PANEL REAR - -


K152059C01
0.917,2.333 1.083,2.333 1.083,2.333 1.521,2.823 false 0.688,2.26 1,2.417 0.313,0.156 10 false *1 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A for Type B - -
*1 ROOF PANEL REAR - -


K151433


g.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


h.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.



K151434N01
5.5,2.125 5.656,2.323 0.156,0.198 10 true A 4.698,1.76 4.854,1.958 0.156,0.198 10 true B 3.906,1.573 4.063,1.771 0.156,0.198 10 true C 2.083,1.333 2.24,1.531 0.156,0.198 10 true D 4.677,3.688 4.833,3.885 0.156,0.198 10 true E 3.865,3.677 4.021,3.875 0.156,0.198 10 true F 2.479,3.604 2.635,3.802 0.156,0.198 10 true G

Reference Value:
Area Measurement Area Measurement
A 1031 mm (40.59 in.) B 1177 mm (46.34 in.)
C 1383 mm (54.45 in.) D 2004 mm (78.90 in.)
E 480 mm (18.90 in.) F 861 mm (33.90 in.)
G 1688 mm (66.46 in.) - -