Home › General › INTRODUCTION › WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS › 2019.06–2021.07
BM35X0E _V1 General _080416 INTRODUCTION _0389976 WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS F

INTRODUCTION  WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS  REPAIR PROCEDURE OF HEADLIGHT ASSEMBLY  


HINT:
·

If the installation area of the headlight assembly is damaged, use the supply retainer for low-cost repair.

·

Make sure that the headlight assembly is not damaged.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH (for Halogen Headlight)


a.
E413193C01
0.625,3.583 1.229,3.583 true 2.073,3.063 2.625,4.042 true 0.427,3.479 0.604,3.656 0.177,0.177 10 false *a 1.906,2.927 2.083,3.104 0.177,0.177 10 false *a
*a Boss


Cut off the blue-colored part in the illustration and smooth with sandpaper.

NOTICE:

After cutting off the part, place the upper headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E413194

Install the upper headlight protector retainer LH with the 2 screws.



INSTALL UPPER NO. 2 HEADLIGHT PROTECTOR RETAINER LH (for Halogen Headlight)


a.
E413191C01
2.146,3.042 1.635,3.448 1.635,3.448 1.969,2.875 true 1.51,3.469 1.688,3.646 0.177,0.177 10 true *a
*a Boss


Cut off the blue-colored part in the illustration and smooth with sandpaper.

NOTICE:

After cutting off the part, place the upper No. 2 headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E413192

Install the upper No. 2 headlight protector retainer LH with the 2 screws.



INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH (for Halogen Headlight)


a.
E413195C01
1.25,3.281 0.865,3.948 0.865,3.948 1.469,3.302 true 0.74,3.948 1.052,4.104 0.313,0.156 10 false *a
*a Boss


Cut off the blue-colored part in the illustration and smooth with sandpaper.

NOTICE:

After cutting off the part, place the lower headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E413196

Install the lower headlight protector retainer LH with the 2 screws.



INSTALL LOWER NO. 2 HEADLIGHT PROTECTOR RETAINER LH (for Halogen Headlight)


a.
E413189C01
1.427,3.396 2.531,3.135 2.531,3.135 1.458,3.635 true 2.563,3.042 2.771,3.208 0.208,0.167 10 false *a
*a Boss


Cut off the blue-colored part in the illustration and smooth with sandpaper.

NOTICE:

After cutting off the part, place the lower No. 2 headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E413190

Install the upper No. 2 headlight protector retainer LH with the 2 screws.



INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH (for LED Headlight)


a.
B541960C01
0.521,3.448 0.885,3.448 true 2.167,3.156 2.052,3.823 true 0.354,3.354 0.531,3.531 0.177,0.177 10 false *a 2.115,2.948 2.292,3.125 0.177,0.177 10 false *a
*a Boss


Cut off the blue-colored part in the illustration and smooth with sandpaper.

NOTICE:

After cutting off the part, place the upper headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
B541961

Install the upper headlight protector retainer LH with the 2 screws.



INSTALL UPPER NO. 2 HEADLIGHT PROTECTOR RETAINER LH (for LED Headlight)


a.
B541962C01
2.01,3.313 1.552,3.76 1.552,3.76 1.885,3.188 true 1.396,3.781 1.573,3.958 0.177,0.177 10 true *a
*a Boss


Cut off the blue-colored part in the illustration and smooth with sandpaper.

NOTICE:

After cutting off the part, place the upper No. 2 headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
B541963

Install the upper No. 2 headlight protector retainer LH with the 2 screws.



INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH (for LED Headlight)


a.
B541964C01
1.458,3.302 0.854,3.729 0.854,3.729 1.25,3.292 true 0.698,3.698 1.01,3.896 0.313,0.198 10 false *a
*a Boss


Cut off the blue-colored part in the illustration and smooth with sandpaper.

NOTICE:

After cutting off the part, place the lower headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
B541965

Install the lower headlight protector retainer LH with the 2 screws.



INSTALL LOWER NO. 2 HEADLIGHT PROTECTOR RETAINER LH (for LED Headlight)


a.
B541966C01
1.292,3.708 2.26,4.146 2.26,4.146 1.979,3.615 true 2.271,4.188 2.479,4.354 0.208,0.167 10 false *a
*a Boss


Cut off the blue-colored part in the illustration and smooth with sandpaper.

NOTICE:

After cutting off the part, place the lower No. 2 headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
B541967

Install the upper No. 2 headlight protector retainer LH with the 2 screws.