INSPECTION PROCEDURES FOR THE BLIND SPOT MONITOR SENSOR BRACKET AND INSTALLATION AREA
Refer to the TOYOTA Repair Manual for blind spot monitor sensor adjustment procedure.
Audio / Visual / Telematics > Park assist / Monitoring > Blind Spot Monitor Sensor Adjustment
If you have replaced the bracket installation panel or blind spot monitor bracket, let alone repaired the bracket installation panel, the sensor installation angle must be checked since it may become misaligned.
Be sure to always perform a functional inspection after any body repair. (This is performed as a comprehensive inspection with the bumper installed.)
RADIATION RANGES OF THE ELECTROMAGNETIC WAVES OF THE BLIND SPOT MONITOR SENSOR IN RELATION TO THE BUMPER
Measure dimensions along the front surface of the bumper.
| *A | except Wagon | - | - |
| *a | 49 mm (1.93 in.) | *b | 154 mm (6.06 in.) |
| *c | 158 mm (6.22 in.) | - | - |
|
Radiation Range of Electromagnetic Waves | - | - |
| *A | for Wagon | - | - |
| *a | 125 mm (4.92 in.) | *b | 192 mm (7.56 in.) |
| *c | 46 mm (1.81 in.) | *d | 200 mm (7.87 in.) |
| *e | 122 mm (4.80 in.) | *f | 45 mm (1.77 in.) |
|
Radiation Range of Electromagnetic Waves | - | - |
PROHIBITIONS REGARDING RADIATION RANGE OF ELECTROMAGNETIC WAVES
The following work is prohibited within the radiation ranges of electromagnetic waves because they might affect the waves.
Putty application repair of damaged areas
Repair by painting is allowed for slight damage that can be filled in by a primer surfacer or paint.
| *a | Avoid the radiation ranges of electromagnetic waves | *b | Apply only primer surfacer to repair damage |
| *c | Radiation Range of Electromagnetic Waves | *d | Cross-Section |
|
REAR BUMPER COVER |
|
BLIND SOPT MONITOR SENSOR |
|
Putty |
|
Primer surfacer |
| *a | Putty is present within the radiation range of electromagnetic waves | *b | Putty is applied to damage within the radiation range of electromagnetic waves |
| *c | Radiation Range of Electromagnetic Waves | *d | Cross-Section |
|
REAR BUMPER COVER |
|
BLIND SOPT MONITOR SENSOR |
|
Putty | - | - |
Paint work having paint boundaries (boundaries of final color or gradations) within the radiation range of electromagnetic waves
There is no problem if the entire radiation range of electromagnetic waves is completely painted.
| *a | Avoid the radiation ranges of electromagnetic waves | *b | Radiation range of electromagnetic waves is covered |
| *c | Radiation Range of Electromagnetic Waves | *d | Cross-Section |
| *e | Clear | - | - |
|
REAR BUMPER COVER |
|
BLIND SOPT MONITOR SENSOR |
|
Final Color |
|
Gradation |
| *a | Paint boundary is present within the radiation range of electromagnetic waves | *b | Gradation is present within the radiation range of electromagnetic waves |
| *c | Radiation Range of Electromagnetic Waves | *d | Cross-Section |
|
REAR BUMPER COVER |
|
BLIND SOPT MONITOR SENSOR |
|
Final Color |
|
Gradation |
Resin repair of cracks and perforations
Always replace the rear bumper cover if there are cracks or perforations in the radiation range of electromagnetic waves.
| *a | Radiation Range of Electromagnetic Waves | - | - |
|
Cracks or perforation | - | - |
| *a | Radiation Range of Electromagnetic Waves | - | - |
|
Cracks or perforation | - | - |
Bumper customization (Work affecting the shape or paint color of the bumper)