FUNCTION OF MAIN COMPONENTS
The main components in the road sign assist system have the following functions.
| Components | Function | |
|---|---|---|
|
*: The threshold can be adjusted to 1 of 3 levels through the customization function. |
||
| Forward Recognition Camera | ·
Captures road signs. ·
Performs road sign assist system control based on information of road signs captured. ·
Controls the supply of electric current to the camera heater when the ambient temperature is low. |
|
| Camera Heater (Forward Recognition Hood with Heater Sub-assembly) | Control is performed by the forward recognition camera to supply electric current and heat the heater, preventing the windshield glass in front of the forward recognition camera from fogging up. | |
| Millimeter Wave Radar Sensor Assembly | Detects object information and sends a signal to the forward recognition camera. | |
| ECM | Sends the shift position signal to the forward recognition camera. | |
| Skid Control ECU | Sends a vehicle speed signal to the forward recognition camera. | |
| Combination Meter Assembly | - | Sends a turn signal command to the forward recognition camera. |
| Multi-information Display | ·
Displays road signs recognized by the forward recognition camera. ·
The road sign assist system can be turned on and off through the settings tab. |
|
| Meter Buzzer | Sounds when the speed limit is exceeded.* | |
| Airbag ECU (Airbag Sensor Assembly) | Yawrate Sensor | Detects the yaw rate and sends it to the forward recognition camera. |
| Steering Sensor | ·
Sends the turning angle of the steering wheel to the forward recognition camera. ·
Sends a turn signal command to the combination meter assembly. |
|
| Turn Signal Switch | Sends a turn signal command to the steering sensor. | |
| Main Body ECU (Multiplex Network Body ECU) | Sends country specification information signals to the forward recognition camera. | |
| Air Conditioning Amplifier Assembly | Sends ambient temperature signals to the forward recognition camera. | |
| Central Gateway ECU (Network Gateway ECU) | Relays the signal between the CAN communication buses. | |
| DLC3 | The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions. | |
FUNCTION
The road sign assist system recognizes the following traffic signals using the forward recognition camera.
| Category | Sign Type | Example of Recognizable Sign |
|---|---|---|
| Speed Limit | Round maximum speed limit |
|
The road sign assist system displays the following traffic signals using the forward recognition camera.
| Category | Display Example | Details |
|---|---|---|
| Speed Limit |
|
·
Informs the driver of the maximum speed limit of the currently driven road. ·
The displayed sign reflects the speed limit on the recognized sign. |
Notification functions are used in the road sign assist system which invert the colors of displayed signs, flash signs, etc. to notify the driver.
Speed Limit Exceeded Notification
While a speed limit sign is displayed, if the actual vehicle speed exceeds the speed limit plus a designated threshold*1, the colors of the displayed sign are inverted and the meter buzzer sounds.*2 For example, if the threshold is set to 5 km/h and the speed limit sign is 60 km/h, the colors of the displayed sign are inverted and the meter buzzer sounds when the actual vehicle speed exceeds 65 km/h.
*1: The threshold can be adjusted to 1 of 3 levels through the customization function.
*2: Customization is required for inverted display and sounding of the meter buzzer.
| Notification Method | Display Example |
|---|---|
| Inverted Display |
|
The road sign assist system can be turned on or off through the settings tab of the multi-information display.
A customization function is used for the road sign assist system, which allows settings such as the notification method and level for exceeding the speed limit to be changed. Setting changes are made through the customization tab of the multi-information display. Refer to the Repair Manual for details.
SYSTEM CONTROL
Control Pattern 1
After a road sign is recognized by the forward recognition camera, the sign is displayed on the multi-information display.
While a sign is displayed on the multi-information display, if a new road sign is not recognized within a specified distance, display of the current sign is turned off.
Control Pattern 2
When the ignition switch is turned off while a speed limit sign is displayed on the multi-information display, the same sign is displayed when the ignition switch is turned to ON again.
Control Pattern 3
While a sign is displayed on the multi-information display, the sign is turned off when turning left or right onto a new road.
DIAGNOSIS
In order to make system inspections easier to perform, a diagnosis function is used in consideration of serviceability. The DTCs of malfunctioning parts can be read by connecting the Global TechStream (GTS). Refer to the Repair Manual for details.