FUNCTION
The illuminated entry system has the following functions:
| Function | Outline | Lights that Operate |
|---|---|---|
|
*1: Models with immobiliser system *2: Models with slide door step light *3: Models with slide door scuff illumination light *4: Models without immobiliser system *5: Models with room light switch |
||
| Door Lock/Unlock-linked | ·
When any door is unlocked, the lights that operate turn on. ·
When all doors are locked, the lights that operate turn off. |
·
Map Lights ·
No. 1 Room Light Assemblies ·
Ignition Key Illumination Light*1 |
| Door Open/Close-linked | ·
When front door or back door is opened, the lights that operate turn on. ·
When all doors are closed, the lights that operate turn off. |
·
Map Lights ·
No. 1 Room Light Assemblies ·
Ignition Key Illumination Light*1 |
·
When rear door is opened, the lights that operate turn on. ·
When all doors are closed, the lights that operate turn off. |
·
Map Lights ·
No. 1 Room Light Assemblies ·
Ignition Key Illumination Light*1 ·
Slide Door Step Light*2 ·
Slide Door Scuff Illumination Light*3 |
|
·
When driver side front door is opened, the lights that operate turn on. ·
When driver side front door is closed, the lights that operate turn off. |
·
Key Cylinder Light Assembly*4 |
|
| Power Source-linked | ·
When the ignition switch is turned from ACC or ON to off, the lights that operate turn on. ·
When the ignition switch is turned from off to ACC or ON, the lights that operate turn off. |
·
Map Lights ·
No. 1 Room Light Assemblies ·
Ignition Key Illumination Light*1 |
| Delay | When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
·
A door unlock-linked function is operated. ·
Any door is opened and then all doors are closed when the ignition switch is off. ·
The ignition switch is turned from ACC or ON to off when all the doors are closed. |
·
Map Lights ·
No. 1 Room Light Assemblies ·
Ignition Key Illumination Light*1 |
| Room Light Switch *5 | ·
When the room light switch is turned to on, the lights that operate turn on. ·
When the room light switch is turned to off, the lights that operate turn off. |
·
Map Lights ·
No. 1 Room Light Assemblies |
| Battery Saving | ·
When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off. ·
The battery saving function is canceled when any of the following operations is performed before the lights are turned off by the function. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off. -
The ignition switch is turned to ACC or ON. -
Any door is opened and closed. -
Any door is unlocked. |
·
Map Lights ·
No. 1 Room Light Assemblies ·
Ignition Key Illumination Light*1 |
| Interior Light Auto Cut | When no changes occur in the condition of the lights switches on for 20 minutes, these lights turn off. | ·
Map Lights ·
No. 1 Room Light Assemblies ·
Slide Door Step Light*2 ·
Slide Door Scuff Illumination Light*3 ·
Key Cylinder Light Assembly*4 |
| Function | Outline | Lights that Operate |
|---|---|---|
|
*1: Models with immobiliser system *2: Models without immobiliser system *3: Models with slide door step light *4: Models with slide door scuff illumination light |
||
| Door Lock/Unlock-linked | ·
When front door is unlocked, the lights that operate turn on. ·
When front doors are locked, the lights that operate turn off. |
·
Map Lights ·
Ignition Key Illumination Light*1 |
| Door Open/Close-linked | ·
When front door is opened, the lights that operate turn on. ·
When front doors are closed, the lights that operate turn off. |
·
Map Lights ·
Ignition Key Illumination Light*1 ·
Key Cylinder Light Assembly*2 |
·
When back door is opened, the lights that operate turn on. ·
When back door is closed, the lights that operate turn off. |
·
No. 1 Room Light Assemblies ·
Slide Door Step Light*3 ·
Slide Door Scuff Illumination Light*4 ·
Back Door Inside Handle Light |
|
| Power Source-linked | ·
When the ignition switch is turned from ACC or ON to off, the lights that operate turn on. ·
When the ignition switch is turned from off to ACC or ON, the lights that operate turn off. |
·
Map Lights ·
Ignition Key Illumination Light*1 |
| Room Light Switch | ·
When the room light switch is turned to on, the lights that operate turn on. ·
When the room light switch is turned to off, the lights that operate turn off. |
·
No. 1 Room Light Assemblies ·
Slide Door Step Light*3 ·
Slide Door Scuff Illumination Light*4 ·
Back Door Inside Handle Light |
| Delay | When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
·
A door unlock-linked function is operated. ·
Front door is opened and then front doors are closed when the ignition switch is off. ·
The ignition switch is turned from ACC or ON to off when all the doors are closed. |
·
Map Lights ·
Ignition Key Illumination Light*1 |
| Battery Saving | ·
When 30 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off. ·
The battery saving function is canceled when any of the following operations is performed before the lights are turned off by the function. After the operation is performed, the lights remain on for another 30 minutes and then the lights are turned off. -
The ignition switch is turned to ACC or ON. -
Front door is opened and closed. -
Any door is unlocked. |
·
Map Lights ·
Ignition Key Illumination Light*1 |
·
When 30 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off. ·
The battery saving function is canceled when any of the following operations is performed before the lights are turned off by the function. After the operation is performed, the lights remain on for another 30 minutes and then the lights are turned off. -
The ignition switch is turned to ACC or ON. -
Back door is opened and closed. -
Room light switch is turned to on. |
·
No. 1 Room Light Assemblies ·
Slide Door Step Light*3 ·
Slide Door Scuff Illumination Light*4 ·
Back Door Inside Handle Light |
|
| Interior Light Auto Cut | When no changes occur in the condition of the lights switches on for 30 minutes, these lights turn off. | ·
Map Lights ·
Key Cylinder Light Assembly*2 |
Collision-linked Interior Light Control (Models with Airbag System)
Condition for turning on the interior lights
The airbag ECU detects an impact
Conditions for turning off the interior lights
Approximately 20 minutes elapse after the lights are turned on
The interior light off operation is performed
The interior lights may not turn on depending on the severity of the impact, the type of collision or due to communication malfunctions.
Customization Function
Settings of some functions can be changed as desired by the user. Refer to the Repair Manual for details.