OUTLINE
Interior Light
Each of the lights is positioned to ensure convenience and comfort.
| *A | Models with Bulb Type Map Light | *B | Models with LED Type Map Light |
| *C | Models with Spot Light Assembly | *D | Models with No. 1 Room Light Assembly (Center) |
| *E | Models with Bulb Type No. 1 Room Light Assembly | *F | Models with LED Type No. 1 Room Light Assembly (with Switch) |
| *G | Models with LED Type No. 1 Room Light Assembly (without Switch) | - | - |
| *1 | Map Light Sub-assembly | *2 | Spot Light Assembly |
| *3 | No. 1 Room Light Assembly (Front) | *4 | No. 1 Room Light Assembly (Center) |
| *5 | No. 1 Room Light Assembly (Rear) | - | - |
| *a | Door-linked Interior Light Switch | *b | Map Light LH |
| *c | Map Light RH | - | - |
| *A | Models with Immobiliser System | *B | Models without Immobiliser System |
| *C | Models with Console Box Illumination Light Assembly | *D | Models with Back Door Inside Handle Light |
| *E | Models with Slide Door Step Light | *F | Models with Slide Door Scuff Illumination Light |
| *1 | Ignition Key Illumination Light | *2 | Key Cylinder Light Assembly |
| *3 | Console Box Illumination Light Assembly | *4 | Back Door Inside Handle Light |
| *5 | Slide Door Step Light | *6 | Slide Door Scuff Illumination Light |
| *A | Models with Immobiliser System | *B | Models without Immobiliser System |
| *C | Models with Console Box Illumination Light Assembly | *D | Models with Back Door Inside Handle Light |
| *E | Models with Slide Door Step Light | *F | Models with Slide Door Scuff Illumination Light |
| *1 | Ignition Key Illumination Light | *2 | Key Cylinder Light Assembly |
| *3 | Console Box Illumination Light Assembly | *4 | Back Door Inside Handle Light |
| *5 | Slide Door Step Light | *6 | Slide Door Scuff Illumination Light |
Illuminated Entry System
The illuminated entry system turns the lights on and off in conjunction with the opening and closing or locking and unlocking of the doors etc., ensuring nighttime usability.
The illuminated entry system is controlled by the main body ECU.
Collision-linked Interior Light Control (Models with Airbag System)
Collision-linked interior light control is used to automatically turn the interior lights on when an impact causes the SRS airbags to deploy.
The interior lights may not turn on depending on the severity of the impact, the type of collision or due to communication malfunctions.
SPECIFICATION
| Light | Specification | |
|---|---|---|
|
*1: Models with bulb type *2: Models with LED type *3: Models with No. 1 room light assembly (center) *4: Models with slide door step light *5: Models with slide door scuff illumination light *6: Models with spot light assembly *7: Models with back door inside handle light *8: Models with console box illumination light assembly *9: Models without immobiliser system *10: Models with immobiliser system |
||
| Map Light Sub-assembly | Map Light LH/RH | Bulb: 12 V 5 W*1 |
| LED*2 | ||
| No. 1 Room Light Assembly (Front) | Bulb: 12 V 8 W*1 | |
| LED*2 | ||
| No. 1 Room Light Assembly (Center)*3 | LED | |
| No. 1 Room Light Assembly (Rear) | Bulb: 12 V 8 W*1 | |
| LED*2 | ||
| Slide Door Step Light*4 | Bulb: 12 V 5 W | |
| Slide Door Scuff Illumination Light*5 | LED | |
| Spot Light Assembly*6 | LED | |
| Back Door Inside Handle Light*7 | LED | |
| Console Box Illumination Light Assembly*8 | LED | |
| Key Cylinder Light Assembly*9 | Bulb: 14 V 1.4 W | |
| Ignition Key Illumination Light*10 | LED | |