Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM
NM35X0E _58 Vehicle Interior _078345 PRE-COLLISION _0379917 PRE-COLLISION SYSTEM DE DETAILS F

PRE-COLLISION  PRE-COLLISION SYSTEM  DETAILS  CAMERA HEATER  


CONSTRUCTION


a.

The camera heater (forward recognition hood with heater sub-assembly) is composed of the sheet heater (heating element) and temperature fuse, etc. Current is run through the sheet heater (heating element) to generate heat and warm the front portion of the forward recognition camera.

Y241611C01
3.333,1.083 2.365,0.698 true 4.823,1.479 3.729,1.813 true 2.188,0.604 2.604,0.885 0.417,0.281 10 false *1 4.865,1.375 5.281,1.656 0.417,0.281 10 false *2
*1 Sheet Heater (Heating Element) *2 Temperature Fuse




OPERATION


a.

When all of the following conditions have been met, the camera heater operates.

·

The ignition switch is turned to ON.

·

The ambient temperature is 10 °C (50 °F) or less.

·

30 seconds or more have elapsed since the camera heater operation stopped.




b.

After the camera heater operates, the operation will stop when a certain length of time has elapsed.

HINT:

Operating time will differ based on vehicle speed, battery voltage and ambient temperature.