Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM › 2019.02–2019.06
NM35X0E _56 Audio / Visual / Telematics _078402 NAVIGATION / MULTI INFO DISPLAY _0380997 NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM CO CONTROL F

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM  CONTROL  NAVIGATION / MULTI INFORMATION  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models with automatic transmission

*2: Models with manual transmission

Radio and Display Receiver Assembly
·

Receives operation signals from the panel switches and touch-sensitive display panel, which allows flick, drag or pinch in/pinch out operation, and data from various components positioned in different parts of the vehicle and sends them to the navigation ECU.

·

Processes navigation information and the operation status from the navigation ECU and displays them on the multi-display.

·

Receives audio signals such as voice guidance from the navigation ECU and sends them to the speakers.

·

Sends a startup signal to the navigation ECU when the audio system started.

·

Sends an R shift position signal to the navigation ECU.

·

Is equipped with a 2.4 GHz frequency band wireless LAN and can communicate with a wireless clients via Wi-Fi.


Major Components of Radio and Display Receiver Assembly Multi-display Panel
·

Displays a map screen or an operation screen based on image signals from the navigation ECU.

·

Sends operation signals input via the capacitive display panel to the navigation ECU.


Navigation ECU
·

Houses a navigation computer, gyro sensor, GPS receiver and storage device, and processes operation signals or vehicle status signals from the radio and display receiver assembly, controlling the navigation system.

·

Sends image and audio signals, such as navigation information, and the operation status to the radio and display receiver assembly.


Major Components of Navigation ECU Navigation Computer
·

Corrects the vehicle position based on location information calculated from GPS information, vehicle speed signals, information from the built-in sensors and the shift status.

·

Applies the mark of the calculated vehicle position to the map database and sends the information and operation status to the radio and display receiver assembly.

·

Sends audio signals such as voice guidance provided in accordance with the vehicle position, to the radio and display receiver assembly.

·

Sends voice guidance audio signals to the radio and display assembly.

·

Sends navigation information such as directions and route guidance, etc. to the combination meter assembly via the radio and display assembly.


Gyro Sensor Detects the vehicle's vertical axis rotation speed (yaw rate and rotation movement) and sends it to the navigation computer.
GPS Receiver Demodulates GPS information received by the navigation antenna assembly, calculates the vehicle position and sends the position signal to the navigation computer.
Storage Device Contains map data and the navigation system control program, etc.
Navigation Antenna Assembly
·

GPS Antenna


Receives GPS signals from satellites in orbit around the Earth, at an altitude of approximately 20,200 km (12,600 miles), and sends them to the navigation ECU.
Roof Antenna Pole Sub-assembly
·

AM

·

FM


Receives radio broadcasting signals (AM/FM).
No. 1 Amplifier Antenna Assembly Amplifies radio broadcasting signals from the radio antenna and sends them to the radio and display receiver assembly.
Windshield Glass
·

DAB Antenna


Receives radio broadcasting signals (DAB).
Digital Audio Broadcasting Antenna Assembly Amplifies DAB signals from the DAB antenna and sends them to the radio and display receiver assembly.
Parking Brake Switch Assembly Sends the parking brake position signal to the radio and display receiver assembly.
ECM Sends information such as the engine speed and rate of fuel consumption to the radio and display receiver assembly.
Park/Neutral Position Switch Assembly*1 Sends a shift position R signal to the radio and display receiver assembly.
Back-up Light Switch Assembly*2
Main Body ECU (Multiplex Network Body ECU) Sends vehicle-related information to the radio and display receiver assembly.
Steering Pad Switch Assembly Sends operation signals from switches such as the volume switch, mode switch and voice switch to the spiral cable sub-assembly.
Spiral Cable Sub-assembly Sends operation signals from the steering pad switch assembly to the radio and display receiver assembly.
Map Light Assembly
·

Telephone Microphone Assembly


·

Receives the user's voice through the microphone module.

·

Recognizes speech during voice recognition system operation and sends the audio signal to the radio and display receiver assembly.


No. 1 Stereo Jack Adapter Assembly
·

Sends audio signals to the radio and display receiver assembly when an auxiliary device is connected.

·

Communicates with the radio and display receiver assembly via a USB communication line when a USB memory device, portable audio player (USB type) or Apple product is connected.


Combination Meter Assembly
·

Displays navigation information from the navigation ECU, such as directions and route guidance, etc., on the multi-information display via the radio and display assembly.


Central Gateway ECU (Network Gateway ECU) Relays the signal between the CAN communication.
DLC3 Allows system diagnosis to be performed when Global TechStream (GTS).


FUNCTION


a.

Navigation Screen

i.

The navigation computer calculates the present position and direction of travel, then determines a route and calculates the driving distance based on the following information sources:

·

Map database

·

Global Positioning System (GPS) satellites

·

Built-in gyro sensor

·

Vehicle speed signal

·

Reverse signal

·

Parking brake signal

·

Radio Data System Traffic Message Channel (RDS-TMC) signal



ii.

The functions of the navigation screen are listed below:

Item Function
Map Display Taillight-interlocked Map Screen Color Change Changes the color of the map screen that is displayed when the taillights are turned on.
Map Display Color Change Changes the color of the map screen.
North Up/Heading Up
·

If North Up is selected, regardless of the direction of vehicle travel, north is always up.

·

If Heading Up is selected, the direction of vehicle travel is always up.


3D Map Displays a 3-dimensional (3D) view of the map.
Micro City Map Displays some areas of major cities with a 2D city map when the map scale is set to 50 m or less.
3D Suburb Model Map When displaying a 3-dimensional (3D) map and the map scale is set to 100 m or less, a 3D suburb model map can be displayed for some areas of major cities.
Dual Map Screen Splits the map in two, and adjusts the scale and orientation of each screen independently.
Compass Mode Screen Displays the direction of travel and detailed data of the present location.
Current Position Display Displays the current position based on the GPS signals being received.
Point of Interest Display Displays selected types of points of interest as marks on the map.
Nearby POI List Display Displays the list of POIs which are located within 32 km (20 miles) from vehicles current position.
Map Scroll The map screen can be scrolled by touching, dragging or flicking it.
Map Display Map Scale Changes the map scale using any of the following methods:
·

Scale screen and choose 1 of 14 steps. Also, any desired map scale can be selected by touching the scale indicator.

·

Pinch in/out: Pinch outward on the screen to zoom in and pinch inward to zoom out.


Route Guidance Demonstration Demonstrates the route guidance to the destination.
Street Name Indication on Scrolled Map Displays the street name and city name even when the map screen is being scrolled.
Speed Limit Display Displays a speed limit icon on the map screen when driving on a major road.
One-way road display Displays one-way roads with an arrow showing direction.
Route Trace
·

Stores up to the last 200 km (124 miles) of a traveled route and retraces the route on the display.

·

Available when the map scale is set to 50 km (30 miles) or less.


RDS-TMC Display Displays RDS-TMC icons, arrows, pop-up messages and indicators when RDS-TMC service is being received.
Destination Search Keyword Search Enables a destination to be searched for using multiple free words.
Favorites List Search Sets a destination from an item in the favorites list (Memory Point).
Recent Set Destination Search Stores the coordinates, names, and dates of up to 100 locations that have been set as destinations in the past.
Address Search After defining a state (province) or country, the destination can be set in 2 ways:
·

Information can be entered in the order of: suburb name, street name and house number.

·

Information can be entered in the order of: house number, street name and suburb name.


Point of Interest Search After defining a state (province) or country, the destination can be set in 3 ways:
·

The name of a POI can be entered and then searched for from suburb, category or use web.

·

A POI category can be selected and a point of interest searched for near the present location, along the current route, near the suburb center or near the destination.

·

The phone number of a point of interest can be entered to search for it.


Destination Search Coordinate Search A destination can be input by entering its coordinates.
Emergency Search Performs a specific search for police stations, hospitals, Toyota dealers and fire stations.
Map Search A destination can be set by using the cursor on the map screen.
Voice-recognition Search A destination can be set by voice command input.
Smartphone Collaboration Search A location that is searched for on a smartphone that is connected to the radio and display receiver assembly via Bluetooth, can be set as a destination.
Automatic Destination List Search
·

By registering home and favorite destinations (up to 2 locations) in advance, when turning the ignition switch is turned to ON, the destination list together with the required time based on route search result is displayed.

·

Starts route guidance when a destination is selected from the list.


Toyota Link Apps Search A point searched for using Toyota Link apps can be set as a destination.
Route Search Multiple Destination Setting Sets multiple destinations. Can also rearrange the sequence of destinations.
Multiple Route Search Searches for multiple routes.
Search Condition Designation Enables a search to be performed using quick, short and alternate search conditions. The results are displayed with the distance and expected arrival time of each of the 3 routes.
Preference Selection When Searching Enables preferences related to motorways, unsealed roads, 4WD tracks, etc., to be set.
Detour Search Changes the route to detour around a section of the route.
Regulated Road Consideration Performs searches which consider regulated roads.
Traffic Congestion Information Consideration Performs searches which consider traffic congestion information.
Avoidance Area Searches for a route that avoids a designated area.
Avoid Traffic Search Automatically changes the route to avoid heavy congestion.
Adaptive Route Search When a route other than the route guidance is traveled frequently, the navigation system learns that route and displays it as an adaptive route in the route search results.
Guidance Voice Guidance Provides voice guidance about the distance and the direction of travel to a destination point based on road conditions and vehicle speed.
Next Turn Guidance Provides guidance about the distance to the next turn and indicates the direction of the turn using an arrow.
Turn List Display Displays a turn list on the right side of the 2-screen display.
Arrow (Turn-by-Turn) Display Displays the direction of the next turn and the distance to the turn on the right side of the 2-screen display.
Lane List Display When traveling a road with two or more lanes when using route guidance, the navigation system indicates the direction and recommended lane when lane information available in the map data.
Intersection Zoom-in Display Zooms in the map display when approaching an intersection.
Signposts Display Displays lane information similar to overhead road traffic signs on the top of the map screen.
Motorways Mode Display Displays the distance to the next junction and exit, or POIs in the vicinity of the motorway exit.
Real Motorway Junction Display Displays the junction and signage in 3D in the vicinity of a major junction while driving.
Direction Sign Display Displays direction signs, similar to overhead motorway signs, with route guidance information overlaid.
Route Information Bar Display Displays the following information:
·

Distance and travel time to the destination

·

Distance to the destination and estimated time of arrival

·

Destinations list when there are multiple destinations


Traffic Bar Display Displays traffic information of congestions or accidents on the route using the traffic bar.
Others Voice Recognition Recognizes pre-programmed system commands spoken to operate the navigation system.
Driver Support Information When the vehicle is approaching a specific zone such as a school zone, railway crossing, high accident zone, speed camera, etc., provides the driver with an announcement by chime, voice warning or warning icon according to the distance to the target.
Map Coverage Information Display Displays the map area that is stored on the navigation ECU.



b.

Information Screen

i.

The functions of the information screen display are listed below:

HINT:

The display order of the menu icons may vary depending on country where the vehicle is sold.


Item Outline
ECO Information about fuel consumption per minute or per trip can be displayed.
Traffic Incidents By receiving the RDS-TMC service, a list of the current traffic incidents is displayed along with information on an incident's distance and position relative to the vehicle. When the user sets a route that receives traffic information (My traffic routes), traffic information along the route is displayed.



c.

Setup Screen

i.

The settings for the functions of the multi-display are available from the setup screen.

HINT:

The display order of the menu icons or menu items may vary depending on the country where the vehicle is sold.


Item Function
General Settings
·

Clock: The time zone and daylight savings time can be adjusted, and GPS synchronization of the clock and 24 hour time format can be turned on/off. (When GPS synchronization is set to off, the clock can be adjusted manually.)

·

Customise home screen: The home screen display layout can be changed.

·

Theme setting: The color of the screen theme can be changed.

·

Beep: The beep sound can be turned off.

·

Units of measurement: The unit of measurement for distance/fuel consumption can be changed.

·

Auto change to screen: Automatic return from the audio control screen to the home screen after audio control operation can be changed.

·

Keyboard layout: Keyboard layout can be changed.

·

Delete keyboard history: Entered keyboard history can be deleted.

·

Memorize keyboard history: Keyboard history memory can be turned on/off.

·

Animation: Animations can be set to on/off.

·

Delete personal data: Registered information (personal data) can be cleared.

·

Software update: The navigation system program can be updated.

·

Software information: Third party software information used in the navigation system, can be displayed.

·

SW sensitivity level: The button sensitivity of the capacitive touch screen can be changed.


Bluetooth Settings
·

Registered device: The list of the registered Bluetooth devices can be displayed, the registered Bluetooth devices can be connected/disconnected and the following items can be set.

-

Bluetooth device name display and editing

-

Bluetooth audio player connection method setting

-

Bluetooth device address display

-

Bluetooth device phone number display

-

Smartphone collaboration on or off setting

-

Bluetooth device profile display


·

Add new device: Bluetooth devices can be added.

·

Remove device: Bluetooth devices can be deleted.

·

Detailed settings: The following items can be set and displayed.

-

The Bluetooth connection can be set to on or off.

-

The automatic connection priority level of registered Bluetooth devices can be changed.

-

The Bluetooth system name can be changed.

-

The PIN code can be changed.

-

The Bluetooth device address can be displayed.

-

The cellular phone connection status display can be set to on or off.

-

The Bluetooth audio player connection status display can be set to on or off.

-

Supported profiles can be displayed.



Audio Settings
·

Common: Common items can be set.

-

Display cover art: The cover art display can be set to on or off.


·

FM: FM radio items can be set.

-

FM radio text: The FM radio text function can be set to on or off.


·

DAB: DAB items can be set.

-

L-Band: The tune range can be set to include or exclude the L-band.

-

DAB traffic announcement: The system can automatically search for a station broadcasting a traffic information program and broadcast it when the traffic information program starts.

-

DAB alternative frequency: The system can be set to automatically switch to a station offering good reception when the reception for the current station is poor.

-

DAB radio text: The DAB radio text function can be set to on or off.



Phone Settings
·

Connect phone: Refer to "Registered device" in "Bluetooth Settings".

·

Sounds: Phone sound settings can be changed:

-

Ringtone: Sets the desired ringtone.

-

Ringtone volume: Adjusts the ringtone volume.

-

In-call volume: Adjusts the default volume of the other party's voice.

-

Incoming SMS/MMS tone: Sets the desired incoming SMS/MMS tone.

-

Incoming SMS/MMS volume: Adjusts the incoming SMS/MMS volume.

-

Incoming E-mail tone: Sets the desired incoming e-mail tone.

-

Incoming E-mail volume: Adjusts the incoming e-mail tone volume.

-

Message readout volume: Adjusts the message readout volume.


·

Notifications: Notification settings can be changed:

-

Incoming call display: The incoming call display can be changed.

"Full Screen": The incoming call display screen is displayed and can be operated on the screen.

"Drop-Down": A message is displayed on the top of the screen.

-

SMS/MMS notification pop-up: Sets the SMS/MMS notification popup on/off.

-

Incoming SMS/MMS display: The incoming SMS/MMS display can be changed.

"Full Screen": The incoming SMS/MMS display screen is displayed and can be operated on the screen.

"Drop-Down": A message is displayed on the top of the screen.

-

E-mail notification pop-up: Sets the e-mail notification popup on/off.

-

Incoming E-mail display: The incoming e-mail display can be changed.

"Full Screen": The incoming e-mail display screen is displayed and can be operated on the screen.

"Drop-Down": A message is displayed on the top of the screen.

-

Display contacts/call history transfer status: Sets the display of the contact/history transfer completion message on/off.


·

Contacts/Call history: Contact/Call history settings can be changed:

-

Automatic transfer: Changes automatic contact/history transfer function settings when a PBAP compatible Bluetooth phone is connected.

-

Transfer contacts from device: Updates contacts from the connected device.

-

Sort contacts by: Sort contacts by the first name or last name field.

-

Add favorite: Adds contacts to the favorites list.

-

Remove favorite: Deletes contacts from the favorites list.

-

Clear call history: Clears contacts from the call history.

-

New contact: Adds new contacts to the contact list.

-

Edit contact: Edits contacts in the contact list.

-

Delete contacts: Delete contacts from the contact list.



Phone Settings
·

Messaging: Message function settings can be changed:

-

Automatic message transfer: Sets automatic message transfer on/off.

-

Automatic message readout: Sets automatic message readout on/off.

-

Update message read status on phone: Sets updating message read status on phone on/off.

-

Use messaging account names from phone: Sets display of messaging account names on the inbox on/off.

-

Vehicle signature: Sets the vehicle signature addition to outgoing messages on/off.



Voice Settings
·

Voice volume: The voice guidance volume can be adjusted.

·

Voice Recognition Prompts: Voice recognition prompts can be set.

·

Automatic navigation guidance: Voice guidance during route guidance can be set.

·

Voice guidance in all modes: Voice guidance while the audio and air conditioning systems are in use can be set.

·

Guidance tone type: Beep sounds while the navigation guidance is operating can be set.


Vehicle Settings
·

Settings can be changed for the following maintenance items:

-

Reminder

-

Engine oil

-

Oil filter

-

Rotation

-

Tyres

-

Battery

-

Brake pad

-

Wipers

-

Coolant

-

Brake fluid/Brake oil

-

Trans. fluid

-

Service

-

Air filter

-

Personal

-

Delete all

-

Reset all

-

Set dealer


·

Customizable vehicle settings can be changed.


Navigation Settings
·

Home: Home information can be registered, edited and deleted.

·

Favorites: Favorites can be registered to the favorite list, edited and deleted from the favorite list.

·

Areas to avoid: Areas to avoid when searching for a route can be registered, edited and deleted.

·

Detailed navigation settings: Detailed navigation settings can be changed.

-

Pop-up information: The pop-up information display can be set to on or off.

-

Favorite POI categories: Up to 6 POI icons that are displayed on the map screen can be selected.

-

Guidance on unverified roads: Guidance on unverified roads can be set to on or off.

-

Unverified roads guidance warning: The unverified road guidance warning can be set to on or off.

-

Guidance with street names: Voice guidance of the next street name can be set to on or off.

-

Intersection zoom map: The intersection zoom map display can be set to on or off.

-

Automatic zoom: The automatic zoom function that operates when nearing a guidance point can be set to on or off.

-

Map color customization: The map color can be set.

-

Map animation: Map animations can be set to on or off.

-

Reset adaptive route: The adaptive route can be deleted.

-

Calibration: The position of the current position mark can be adjusted.

-

3D suburb model map: The 3D suburb model map can be set to on or off.

-

Guidance level for petrol stations: The warning display when the fuel level is low can be set to on or off.

-

My memory: My memory settings can be changed.

-

Speed limit display: The speed limit information display can be set to on or off.

-

Speed limit settings: Speed limit settings can be changed.

-

Time restriction notification: Time restriction notifications can be set to on or off.

-

Private road notification: Private road notifications can be set to on or off.

-

Automatic destination list info: Automatic destination list information can be set to on or off.

-

Adaptive route: The adaptive route function can be set to on or off.

-

Driver support information: Driver support information can be set to on or off.

-

Safety zone: A safety zone can be displayed on the map screen.

-

Restore default settings: All settings can be reset.



Wi-Fi Settings
·

The Wi-Fi function can be switched on/off.

·

The Miracast connection status is displayed.


Toyota Link Settings Items necessary for the Toyota Link can be set or changed:
·

Data usage message: The pop-up display for when a cellular telephone communication fee could occur can be set to on or off.

·

Auto detect iPhone app: Automatic detection of the iPhone application can be set.

·

Connect USB device in enhanced mode: The usage of enhanced mode when a USB device is connected can be set.

·

App Suite USB install: Toyota Link apps can be installed using a USB memory device.


Traffic Settings
·

My traffic route: Sets specific routes (such as frequently used routes) on which the user wishes to receive traffic information.

·

Avoid traffic: Sets the avoid traffic function auto/manual.

·

Consider traffic info for ETA: Sets the usage of traffic information for the estimated arrival time on/off.

·

Show free flowing traffic: Sets the display of an arrow of free flowing traffic on/off.

·

Use predictive traffic: Sets to on/off whether to consider the predictive traffic information with the estimated arrival time and detoured route search.

·

Traffic incident warning: Sets traffic incident voice warning on/off.

·

Show traffic info: Displays the traffic information display.






DIAGNOSIS


a.

For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.