CONSTRUCTION
Front Washer Nozzle
Diffuser type washer nozzle sub-assemblies are located under the engine hood to ensure good appearance.
With the adoption of the diffuser type washer nozzle sub-assemblies, only a small amount of washer fluid is needed to spray over a large area, achieving excellent wiping performance.
| *1 | Washer Nozzle Sub-assembly | - | - |
| *a | Washer Fluid Spray Area | *b | Fluid Volume |
| *c | Main Flow Center | - | - |
Diffuser type washer nozzle sub-assemblies cannot be adjusted because of their structure. Do not attempt to adjust the nozzles as it could damage them. If adjustment is necessary, adjust the spray pattern by replacing the nozzles with those selected from the 3 part numbers available. For details, refer to the Repair Manual.
Rear Washer Nozzle (Models with Rear Wiper System)
A Spray type rear washer nozzle is located on the back door panel.
| *1 | Back Door Panel | *2 | Rear Washer Nozzle Sub-assembly |
| *a | Washer Fluid Spray Area | *b | View from A |