Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM › 2019.02–2019.06
NM35X0E _59 Vehicle Exterior _078579 WIPER / WASHER _0382011 WIPER AND WASHER SYSTEM GE GENERAL F

WIPER / WASHER  WIPER AND WASHER SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Front Wiper System

i.

The windshield wiper motor assembly and wiper link assembly are mounted in a modular frame, reducing wiper operation sound and reducing variations in the wiping range.


ii.

The vehicle speed-sensing, adjustable interval function is controlled by the windshield wiper relay assembly and main body ECU, and it automatically changes the wiper operation interval time according to the vehicle speed and interval time adjuster.*


iii.

Diffuser type washer nozzle sub-assemblies are provided under the engine hood to ensure a good appearance.


iv.

A graphite coating is applied to the surface of the wiper rubber, reducing inversion noise and wiper flutter while the wipers are operating.

*: Models with vehicle speed-sensing, adjustable interval function




b.

Rear Wiper System (Models with Rear Wiper System)

i.

The rear wiper system has a washer-linked wiper function and intermittent interval function.


ii.

By using a resin rear wiper arm, a unified rear wiper blade look has been achieved.