Home › Power Source / Network › BATTERY / CHARGING › CHARGING SYSTEM
NM35X0E _57 Power Source / Network _079580 BATTERY / CHARGING _0385874 CHARGING SYSTEM GE GENERAL F

BATTERY / CHARGING  CHARGING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A charging control system is used on models with stop and start system.

i.

In order to enhance fuel economy, a charging control which optimally controls the generated voltage is utilized.


ii.

The ECM optimizes the voltage generated by the generator with regulator assembly in accordance with the state of the auxiliary battery, electrical load operation situation and driving conditions.



b.

A compact and lightweight segment conductor type generator assembly is used.


c.

Operation of the clutch set to the generator pulley with clutch, cancels generator pulley with clutch inertia and helps to prevent slipping of the fan and generator V belt. This realizes a low tension fan and generator V belt that achieves reduced friction.


d.

A European Norm (EN) battery is used.