OUTLINE
An AC60E 6-speed Electronic Control Transmission (ECT) is used. This automatic transmission is provided with a wide gear ratio, achieving superior output performance and fuel economy. Also, by simplifying the structure, size and weight reduction is achieved.
A straight type shift lever is used.
A multi-mode automatic transmission is used.
A shift pattern select switch is used.
An ATF cooler is used in the ATF cooling system.
A water-cooled type ATF cooler and an ATF warmer with transmission oil thermostat are provided in the ATF cooling system.*
*: Models with ATF warmer
SPECIFICATION
| Gear Ratio | 1st | 3.600 |
| 2nd | 2.090 | |
| 3rd | 1.488 | |
| 4th | 1.000 | |
| 5th | 0.687 | |
| 6th | 0.580 | |
| Reverse | 3.732 | |
| Fluid Type | Toyota Genuine ATF WS | |
| Fluid Capacity | 9.8 Liters (10.4 US qts, 8.6 Imp. qts)*1
9.7 Liters (10.3 US qts, 8.5 Imp. qts)*2 |
|
| Weight (Reference)*3 | 84.3 kg (185.8 lb)*1
84.2 kg (185.6 lb)*2 |
|
*1: Models with ATF warmer
*2: Models without ATF warmer
*3: Weight refers to a transmission with the fluid fully filled.
| Gear Ratio | 1st | 3.600 |
| 2nd | 2.090 | |
| 3rd | 1.488 | |
| 4th | 1.000 | |
| 5th | 0.687 | |
| 6th | 0.580 | |
| Reverse | 3.732 | |
| Fluid Type | Toyota Genuine ATF WS | |
| Fluid Capacity | 9.7 Liters (10.3 US qts, 8.5 Imp. qts) | |
| Weight (Reference)*3 | 86.5 kg (190.7 lb)*1
86.2 kg (190.0 lb)*2 |
|
*1: Models with stop and start system
*2: Models without stop and start system
*3: Weight refers to a transmission with the fluid fully filled.
| Compound Gear Unit | Front Planetary Gear Assembly | No. of Sun Gear Teeth | 46 |
| No. of Pinion Gear Teeth | 16 | ||
| No. of Ring Gear Teeth | 78 | ||
| Center Planetary Gear Assembly | No. of Sun Gear Teeth | 30 | |
| No. of Pinion Gear Teeth | 24 | ||
| No. of Ring Gear Teeth | 78 | ||
| Rear Planetary Gear Assembly | No. of Sun Gear Teeth | 30 | |
| No. of Pinion Gear Teeth | 24 | ||
| No. of Ring Gear Teeth | 78 |
| No. 1 Clutch (C1) | No. of Discs | 5 |
| No. 2 Clutch (C2) | No. of Discs | 5 |
| No. 1 Brake (B1) | No. of Discs | 5 |
| No. 2 Brake (B2) | No. of Discs | 7 |
| No. 4 Brake (B4) | No. of Discs | 4 |
| 1-way Clutch (F) | No. of Sprags | 26 |
| Torque Converter Type | 3-element, 1-step, 2-phase |
| Stall Torque Ratio | 1.850 |