CONSTRUCTION
The backup boost converter uses a semiconductor relay. The semiconductor relay also functions as a fuse. When overcurrent is detected, the relay is turned off to protect the circuit.
The backup boost converter supplies battery voltage to help make up for the voltage drop that occurs when the engine is restarted. This prevents the operation of the following equipment from being interrupted due to low battery voltage.
Radio and Display Receiver Assembly
Navigation ECU Assembly
Steering Sensor
Skid Control ECU
Combination Meter Assembly
Central Gateway ECU (Network Gateway ECU)
Air Conditioning Control Assembly
Blind Spot Monitor Sensor LH/RH
Tire Pressure Warning ECU and Receiver
Digital Inner Rear View Mirror (Inner Rear View Mirror Assembly)
EC Mirror (Inner Rear View Mirror Assembly)
Main Body ECU (Multiplex Network Body ECU)
No. 1 Room Light Assembly (Front)
No. 1 Room Light Assembly (Rear)
Back Door Inside Handle Light
Slide Door Scuff Illumination Light (LH)
Step Light (LH)
Varies depending on the vehicle specification.