CONSTRUCTION
A water-cooled type ATF cooler built into the radiator and ATF warmer with transmission oil thermostat are used .
| *1 | ATF Warmer (Transmission Oil Cooler with Thermostat Assembly) | *2 | Oil Cooler Inlet Tube |
| *3 | Radiator Assembly | *4 | Oil Cooler Outlet Tube |
The ATF warmer uses engine coolant that has been warmed by the engine to warm up the ATF quickly. Consequently, the friction losses of the automatic transmission are quickly reduced, improving fuel economy.
The ATF warmer has a transmission oil thermostat that changes the route through which the ATF flows.
| *1 | ATF Warmer (Transmission Oil Cooler with Thermostat Assembly) | *2 | Transmission Oil Thermostat |
| *a | To Transmission | *b | From Transmission |
| *c | To Engine | *d | From Heater Core |
| *e | To Radiator (Water-cooled Type ATF Cooler) | *f | From Radiator (Water-cooled Type ATF Cooler) |
|
ATF Flow |
|
Engine Coolant Flow |
FUNCTION
When the ATF temperature is low, it is heated by the ATF warmer using the engine coolant, and when the ATF temperature is high, it is cooled down by the ATF warmer and radiator (watercooled type ATF cooler).
| *1 | Transmission | *2 | ATF Warmer |
| *3 | Transmission Oil Thermostat | *4 | Radiator (Water-cooled Type ATF Cooler) |
| *a | ATF Temperature is Low | *b | ATF Temperature is High |
The transmission oil thermostat consists of a poppet valve, a bypass valve and an element case (contains wax). When the ATF temperature changes from low to high, the wax will expand to start to open the poppet valve and close the bypass valve, switching the ATF passages.
| *1 | Thermostat | *2 | Element Case (Contains Wax) |
| *3 | ATF Warmer | - | - |
| *a | ATF Temperature is Low | *b | ATF Temperature is High |
| *c | Poppet Valve: Closed | *d | Poppet Valve: Open |
| *e | Bypass Valve: Open | *f | Bypass Valve: Closed |
| *g | From Transmission | *h | To Transmission |
| *i | To Radiator (Water-cooled Type ATF Cooler) | *J | From Radiator (Water-cooled Type ATF Cooler) |
|
ATF Flow | - | - |