FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
|
*1: Models with multimedia system or navigation system *2: Models with VSC *3: Models without VSC *4: Models with LED type clearance light |
||
| H-LP Relay LH | ·
Receives low/high beam headlight turn on/turn off signals from the main body ECU. ·
Supplies power to the headlight assembly LH/RH. |
|
| H-LP Relay RH | ||
| DIMMER Relay LH | Receives low/high beam headlight turn on/turn off signals from the main body ECU and outputs them to the headlight assembly LH/RH. | |
| DIMMER Relay RH | ||
| TAIL Relay | Supplies power to the clearance light*4, taillights and license plate lights. | |
| Radio Display and Receiver Assembly*1 | ·
Displays the settings screen. ·
Sends function customization information signals to the main body ECU. |
|
| Turn Signal Switch | Light Control Switch | Sends the light control switch position signal to the steering sensor*1 or Combination Switch ECU Sub-assembly*2. |
| Steering Sensor*2 | Sends the light control switch position signal to the main body ECU. | |
| Combination Switch ECU Sub-assembly*3 | ||
| Main Body ECU (Multiplex Network Body ECU) | Receives various signals and illuminates the headlights, clearance lights, taillights, and license plate lights. | |
| Automatic Light Control Sensor | Detects the ambient light level and transmits a signal to the main body ECU. | |
| Front Door Courtesy Light Switch Assembly (for Driver Door) | Detects whether a driver door is open or closed and sends the signal to the main body ECU. | |
| Central Gateway ECU (Network Gateway ECU) | Relays the signal between the CAN communication lines. | |
| DLC3 | The Global TechStream (GTS) can be connected to change settings as desired by the user. | |
SYSTEM CONTROL
Operating Condition
The automatic light control system operates as follows:
| Function | Outline |
|---|---|
| Headlights and Taillights Turn On | When all of the following conditions are met, the headlights, clearance lights, taillights and license plate lights automatically turn on:
·
The ambient light is dark or momentarily bright.* ·
The ignition switch is ON. ·
The light control switch is in the AUTO position. |
| Headlights and Taillights Turn Off | When the ambient light is bright, the exterior lights automatically turn off. |
*: The sensitivity of the automatic light control sensor can be changed on the settings screen of the radio display and receiver assembly or Global TechStream (GTS).