CONSTRUCTION
Rear Seat Cushion
The rear seat cushion pad is optimized, achieving a seat with an excellent cushioning feeling and cushioning stroke.
| *1 | Rear Seat Cushion | - | - |
| *a | Thickness of Rear Seat Cushion Pad | *b | The illustration shown is examples only. |
Assist Grip, Cup Holder, Seatback Pocket, Convenience Hook, Armrest
Assist grips, cup holders, seatback pockets and convenience hooks are provided on the seatback of the single-passenger, 2-passenger and 3-passenger rear seat with reclining function in consideration of passenger usability and comfort.
An armrest is provided on the 2-passenger rear seat with reclining function in consideration of passenger comfort.
| *A | DX Grade | *B | GL Grade GL Grade without Rear Seat Armrest |
| *C | GL Grade with Rear Seat Armrest | - | - |
| *1 | Assist Grip | *2 | Convenience Hook |
| *3 | Cup Holder | *4 | Seatback Pocket |
| *5 | Rear Seat Armrest | - | - |
| *a | The illustration is shown an example only. | - | - |
Assist grips are provided on the seatback of the 4-passenger rear seat.
Rear Seat Headrest
Headrests are provided for the single-passenger, 2-passenger and 3-passenger rear seats depending on the model.
Flip Up Seat
Two flip up 2-passenger seats are provided in the last row depending on the model.
Dampers are provided for the space-increasing 2-passenger seat to decrease the speed at which the seat returns from the flipped up condition and the amount of locking noise, improving the quality feel.
A convenience hook is provided on the under cover in consideration of usability after the seat is flipped up.
A hanger hook is provided on the back of the seat depending on the model.
| *1 | 2-passenger Flip Up Seat | *2 | Hanger Hook |
| *3 | Convenience Hook | - | - |
| *a | Flip-up State | *b | The illustration is shown an example only. |
| *1 | Reclining Lever | *2 | Lock Release Lever |
| *3 | Securing Band | - | - |
| *a | Remove the headrest | *b | While pressing the reclining lever, fold down the seatback |
| *c | Pull up the lock release lever and flip up the seat | *d | Fold in the seat leg and pull out the securing band |
| *e | Hook the securing band on the hook on the D pillar side | *f | Pull the end of the band tight and securely attach the fastening tape |
| *g | The illustration is shown an example only. | - | - |
ISOFIX Bar
Top tether anchor bars are provided in the rear seats depend on the model. Also, covers (child restraint seat tether anchor cover) are used for the top tether anchor bars in consideration of appearance.
| *A | Models for Australia and New Zealand | *B | Except Models Australia and New Zealand |
| *1 | ISOFIX Bar | *2 | Top Tether Anchor Bar |
| *3 | Rear Seatback Cover (Child Restraint Seat Tether Anchor Cover) | - | - |