Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM › 2019.02–2019.06
NM35X0E _58 Vehicle Interior _076624 DOOR LOCK _0387840 POWER DOOR LOCK CONTROL SYSTEM CO CONTROL F

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  CONTROL  DOOR LOCK CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components in the power door lock control system have the following functions:

Component Outline

*1: Models without wireless door lock control system

*2: 5-door models

Instrument Panel Junction Block Assembly D DR UNLOCK Relay Inputs driver door unlock request signals from the main body ECU and operates the driver door lock motor.
L/D DR UNLOCK Relay Inputs passenger door unlock request signals from the main body ECU and operates the door lock motors at the front passenger door, rear slide doors and back door.
ALL DR LOCK Relay Inputs door lock request signals from the main body ECU and operates the door lock motor of all doors.
Front Door Lock with Motor Assembly (for Driver Door)
·

Door Lock Motor

·

Door Lock Position Switch

·

Door Lock Control Switch


·

Rotates the built-in door lock motor to lock and unlock the doors.

·

Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU.

·

Detects the condition of the built-in door lock control switch and outputs mechanical key lock/unlock request signals to the main body ECU.


Front Door Lock with Motor Assembly (for Front Passenger Door)
·

Door Lock Motor

·

Door Lock Position Switch

·

Door Lock Control Switch*1


·

Rotates the built-in door lock motor to lock and unlock the doors.

·

Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU.

·

Detects the condition of the built-in door lock control switch and outputs mechanical key lock/unlock request signals to the main body ECU.*1


Slide Door Lock Remote Control Assembly (for Driver Side)*2
·

Door Lock Motor

·

Door Lock Position Switch


·

Rotates the built-in door lock motor to lock and unlock the doors.

·

Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU.


Slide Door Lock Remote Control Assembly (for Front Passenger Side)
·

Door Lock Motor

·

Door Lock Position Switch


·

Rotates the built-in door lock motor to lock and unlock the doors.

·

Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU.


Back Door Remote Control Assembly
·

Door Lock Motor

·

Door Lock Position Switch


·

Rotates the built-in door lock motor to lock and unlock the doors.

·

Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU.


Front Door Courtesy Light Switch Assembly (LH) Outputs open/close signals for the front door LH to the main body ECU.
Front Door Courtesy Light Switch Assembly (RH) Outputs open/close signals for the front door RH to the main body ECU.
Rear Door Courtesy Light Switch Assembly (for Driver Side)*2 Outputs open/close signals for the rear door (driver side) to the main body ECU.
Rear Door Courtesy Light Switch Assembly (for Front Passenger Side) Outputs open/close signals for the rear door (front passenger side) to the main body ECU.
Back Door Lock with Courtesy Light Switch Assembly
·

Courtesy Switch


Outputs open/close signals for the back door to the main body ECU.
Multiplex Network Master Switch Assembly
·

Door Control Switch


Sends manual lock and unlock request signals to the main body ECU.
Un-lock Warning Switch Assembly Detects whether or not the ignition key is inserted into the ignition key cylinder and sends this information to the main body ECU.
Main Body ECU (Multiplex Network Body ECU) Drives all door lock motors in response to signals.
Central Gateway ECU (Network Gateway ECU) Relays the signal between the CAN communication lines.
DLC3 The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions.



FUNCTION


a.

The power door lock control system has the following functions:

Function Outline

*1: Models with wireless door lock control system

*2: Models with IG ON unlock function

Manual Unlock This function unlocks all the doors when the door control switch is operated to the unlock side.
Manual Lock This function locks all the doors when the door control switch is operated to the lock side.
Key-linked Unlock This function, which is linked with the door lock key cylinder, can unlock all the doors when an unlock operation is performed.
Key-linked Lock This function, which is linked with the door lock key cylinder, can lock all the doors when a lock operation is performed.
Manual Unlock Prohibition When the doors are all closed and are locked using a key-linked lock operation or wireless door lock operation*1, unlocking the vehicle using the door control switch is prohibited.
Key Confinement Prevention When the key is inserted in the ignition key cylinder and the door lock operation is performed while the driver door is open, all the doors will be unlocked.
IG ON Unlock*2 This function unlocks all the doors when the ignition switch is ON.



DIAGNOSIS


a.

If there is a malfunction in the system, the main body ECU stores the Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.