CONSTRUCTION
The steering intermediate shaft assembly and steering column assembly each contain an energy absorbing mechanism.
OPERATION
Primary Collision
The steering intermediate shaft assembly contracts during a primary collision (vehicle to another object) to reduce the possibility of the steering column assembly and the steering wheel assembly protruding further into the cabin.
| *1 | Steering Intermediate Shaft Assembly | *2 | Steering Column Assembly |
| *a | Before Collision | *b | After Collision |
|
Contract | - | - |
Secondary Collision
The steering column assembly contracts during a secondary collision (driver and vehicle) in order to absorb impact. The breakaway pin on the lower housing shears and disengages the telescopic lock hook to move the steering wheel assembly toward the front of the vehicle. As the steering column assembly contracts, the column tube slides on the inner surface of the lower housing, generating friction and absorbing the energy of the collision.
| *1 | Lower Housing | *2 | Breakaway Pin |
| *3 | Telescopic Lock Hook | *4 | Column Tube |
| *a | Before Collision | *b | After Collision |
| *c | Column Tube Cross Section | *d | Sliding Stroke |
| *e | A-A Cross Section | - | - |