CONSTRUCTION
A clutch disc assembly, which uses a semi-mold type clutch lining, is used.
Clutch lining, which improves wear performance and anti-judder performance, is used.
On models with a 1GD-FTV engine, a dual mass flywheel (DMF) has been adopted, providing excellent noise and vibration performance.
| *1 | Outer Spring | *2 | Inner Spring |
| *3 | Flywheel Sub-assembly | *4 | Secondary Flywheel |
| *5 | Primary Flywheel | - | - |
| *a | Flywheel Sub-assembly Cross Section | - | - |