OUTLINE
A center support bearing damper is provided to reduce noise.
A torsional damper is provided to reduce noise.
A 3-joint type propeller shaft is used.
| *A | Models with 1GD-FTV Engine and AC60E Automatic Transmission | *B | Models with RC60J Manual Transmission |
| *1 | Hook's Joint | *2 | Center Bearing |
| *3 | Center Support Bearing Damper | *4 | Torsional Damper |
|
Transmission Side |
|
Rear Differential Side |
A 4-joint type propeller shaft is used.
| *A | Models with 1GD-FTV Engine and AC60E Automatic Transmission | *B | Models with RC60J Manual Transmission |
| *1 | Hook's Joint | *2 | Center Bearing |
| *3 | Center Support Bearing Damper | *4 | Torsional Damper |
|
Transmission Side |
|
Rear Differential Side |