OUTLINE
An RC60J 6-speed manual transmission is used.
An output reduction method is used to achieve a compact construction and light weighting.
The gear range has been expanded due to the gear layout of the 4th gear direct coupling and double overdrive (5th and 6th gears), achieving superior fuel economy and driveability.
A multi-cone synchromesh mechanism has been provided for the low gears (1st, 2nd and 3rd) to achieve a superior shift feeling.
An intelligent Manual Transmission (iMT) system is used. This system adjusts the engine speed during a shift change to match the transmission speed, achieving a smooth shift change.*
*: Models with iMT switch
SPECIFICATION
| Gear Ratio | 1st | 4.784 |
| 2nd | 2.423 | |
| 3rd | 1.443 | |
| 4th | 1.000 | |
| 5th | 0.777 | |
| 6th | 0.643 | |
| Reverse | 4.066 | |
| Oil Capacity | 2.8 Liters (3.0 US qts, 2.5 Imp. qts) | |
| Oil Viscosity | SAE 75W-90 | |
| Oil Grade | "TOYOTA Genuine Manual Transmission Gear Oil API GL-3 (GL-4)" or equivalent | |
| Weight (Reference)* | 71.5 kg (157.6 lb) | |
*: Weight shows the figure with the fluid fully filled.
PRECAUTION
Limitations of the iMT
iMT is not a system that prevents shift lever operation error or engine over revving. Depending on the situation, iMT may not operate normally and the shift position may not be changed smoothly. Overly relying on iMT may cause an unexpected accident.